Velocity stack with 19mm inner diameter. This adapter allows you to use aftermarket clamp-style air filters with 44mm inner mounting diameter. Precision machined for smooth air flow. Tall 3/4" height for better low end power. 30,5mm center to center bolt hole spacing. Dual outer grooves for sturdy clamp mounting.

Fits Walbro WA / WT / WYK / HDA etc. style carburetors. Fits Zenoah G23LH / G2D / G43L / G230RC / G260RC / G240RC / G270RC / G320RC /  G231PUH / G260PUH / G260PU / G231PUM / G260PUM engines. Also fits Chung Yang CY23RC / CY26RC / CY27RC / CY29RC / GP290 engines. Fits Walbro WA / WT / WYK style carburetors.

Note: Order the velocity stack gasket ( 011212 ) if you have an Walbro WT style carb mounting.

Carb spacer fits Walbro WT series carburetors. Fits between carburetor and velocity stack or air filter to allow carburetor choke plate to fully open.

Made in Germany

Vavle tool with magnet for pocket bike, 43/49/71cc gas scooter and goped tyre.

Vavle Cap for Pocket Bike, Gas Scooter and Goped Tyre Vavle

Brake cable endclip, fits al brake cable what we sell.

140mm diameter precision ground brake rotor.

For use with the billet front wheel (060836) and Hub Wheel Set (010800)

Go-ped 6,5" CNC Rim (Disc) Set + CNC Hub Set to run pocketbike style Rims with Racing Tires.

Fits GSR Cruiser, GSR26, GSR29, GSR40, GSR46R, GSR Interceptor, Pro60, GTR Roadster and GTR Interceptor.

Front hub and rear adaptor have 6 bolt IS pattern for mountain brake rotor (041122). The rear sprocket mounts using the same holes as the stock wheel, allowing you to use any of the GSR rear sprocket sizes. Includes front and rear hubs, sprocket to rotor adaptor, bearings, center spacers, axle spacers, hardware and two CNC Rims with Valve for front and rear. The Spacer for the rear Fender to get more place from tyre to fender is include to. Rim sice 2,1" - 6,5" - 99 and 2,3" - 6,5 - 130.

To drive now with this Kit you need two Tyres (010903) and two Brake Disc (041122)

Velocity Choke assembly with 3/4" thru hole for velocity stack. Works with al V-stack (30,5mm from center to center bolt spread). 

This is the first Choke System with new Rubber Cord on outside of the Choke. This guarantee the engine don´t received parasitic air-

This Velocity Choke is fit for many WYK, WT, HDA an so on Walbro Carburetor Series.

Note: Only with this choke you cannot mounting an performance filter. You need the velocity stack (010420)

Note: Order the velocity stack gasket (011212) for maximum power.

Made in Germany!

Riot Frame & rear swingarm (Nr.57) assy in sinister black.

Includes parts sold separately
* Part # - Description - Qty
* 212130004 - Compression block - 1 (Nr.79)
* 212130008 - STFSE unit; .625 x 3.375" - 4 (Nr.80)
* 131130004 - Bolt; 5/8-11 x 1" CPSS - 4 (Nr.78)
* 7009 - Washer; axle, 1/2" AN FLT ZNC - 1 (Nr.77)
* 7008 - Nut; 1/2-20 lopro nylon - 1
* 1028C - Head set; Bearing cup (single) - 2 (Nr.7)
* 1068 - Made in USA sticker - 1

 Part Number:216030006

Screw locking device middle celebration. To save and fastening of screws and hydraulics thread at vibration. Until normally dismantling destitute of M36. Applying at blind holes also into the drilling. Application area: Universal securing of nuts and screws, for passive surfaces technical characteristics: Temperature resistance: -55° degrees Celsius to +150° degrees Celsius sticking opening: 0,03-0,14 mm and till M36, sturdy after approx. 12 minutes

Front fork swingarm assy (TR & RIOT)

PMW Applications: 10"PT
* GTR40 = Trail Ripper 40
* RIOT
* GTR Roadster

Specifications
* Front fork swingarm assembled.
* Powder coated Sinister Black